ADLINK M-342 - Manual (Page 73)

BIOS Setup 59
M-342
Device Settings
Set the serial port address and IRQ. Options: Auto, IO=2F8h;
IRQ=3, IO=3F8h; IRQ=3, 4, 5, 6, 7, 9. 10, 11, 12, IO=2F8h;
IRQ=3, 4, 5, 6, 7, 9. 10, 11, 12, IO=3E8h; IRQ=3, 4, 5, 6, 7, 9.
10, 11, 12, IO=2E8h; IRQ=3, 4, 5, 6, 7, 9. 10, 11, 12
Parallel Port Configuration
Parallel Port
Enable or disable Parallel Port. Options: Disabled, Enabled.
Change Settings
Select an optimal setting for Super IO device. Options: Auto,
IO=378h; IRQ=5, IO=378h; IRQ=5, 6, 7, 9, 10, 11, 12,
IO=278h; IRQ=5, 6, 7, 9, 10, 11,12, IO=3BCh; IRQ=5, 6, 7, 9,
10, 11, 12.
Device Mode
Change the Printer Port Mode. Options: STD Printer Mode,
SPP Mode, EPP-1.9 and SPP Mode, EPP-1.7 and SPP Mode,
ECP Mode, ECP and EPP-1.9 Mode, ECP and EPP-1.7 Mode.
Smart Fan Function
Enable or disable the Smart Fan function.