ADLINK M-342 - Manual (Page 39)

Hardware Information 25
M-342
2.4 Jumpers
Clear CMOS (CLCMOS)
The CMOS RAM data contains the date / time and BIOS setting
information. CMOS is powered by the onboard button cell battery.
To erase the CMOS RAM data:
1. Power down and disconnect power from the system.
2. Short pins 2-3 on JP1.
3. Reconnect power and power up the system.
4. After power up, remove the jumper cap from pins 2-3
and reinstall it to pins 1-2.
COM6 Mode Jumper Settings (JP1~3)
Short the jumper pins according to the following settings to set
COM6 to RS-232/422/485 mode:
RTC status Connection CLCMOS
Normal 1 – 2
Clear CMOS 2 – 3
RS-232 RS-422 RS-485
JP1 1-3, 2-4 3-5, 4-6 3-5, 4-6
JP2 1-2 3-4 5-6
JP3 1-3, 2-4 3-5, 4-6 3-5, 4-6
1 5
2 6