7 chipset setup, Hda controller, Onboard lan bios init – ADLINK cPCI-6615 User Manual

Page 92: Onboard lan1/2 output select, Initial graphics adapter, Chipset setup

Text mode
Original mode

BIOS Setup

8.7

Chipset Setup

Select the Chipset tab from the setup screen to enter the Chipset
BIOS Setup screen. You can select any of the items in the left
frame of the screen to go to the sub menu for that item. The Chip-
set BIOS Setup screen is shown below.

HDA Controller

Set this value to Enable/Disable the HD Audio Controller.

Onboard LAN BIOS Init

Set this value to enable/disable the invoking of onboard LAN’s
PXE ROM. Disabling can shorten the POST time by not initializing
LAN PXE ROM. Enable it if boot from LAN is needed.

Onboard LAN1/2 Output Select

Set the Onboard LAN1/2 output to Front or Rear.

Initial Graphics Adapter

Select which graphics controller to use as the primary boot device.