ADLINK cPCI-6520 - Manual (Page 53)

Board Interfaces 41
cPCI-6520
SW_IPMCDEG1
Switch SW_IPMCDEG1 is for debugging purposes and should
be left in the default setting of “All OFF”.
Reserved Switches
Button SW13 and switches SW_COMDEG1, SW_COMPW1
and SW_IPMCDEG1 are reserved and their settings should not
be altered unless instructed by ADLINK. The default settings
are as follows:
SW_COMDEG1: 1, 2 ON; 3, 4 OFF
SW_COMPW1: ON (short 2-3)
Pin Function
1, 4 ON Force power on
2, 3 ON Disable IPMC latch
All ON Disable IPMC
All OFF IPMC enable (Default)
NOTE: NOTE:
When the cPCI-6520 is mated with the cPCI-R6700, it is nec-
essary to set pins 1, 4 on the SW_IPMCDEG1 to ON (Force
power on).
ON
1
2