ADLINK ND-6063 - Manual (Page 65)

Command Set
• 57
3
Command Set
3.1 Command and Response
3.1.1 Introduction
The NuDAM command is composed by numbers of characteristics,
including the leading code, address ID, the variables, the optional
check-sum byte, and a carriage return to indicate the end of a command.
The host computer can only command only one NuDAM module except
those syncronized commands with wildcard address “**”. The NuDAM may
or may not give response to the command. The host should check the
response to handshake with the modules.