ADLINK ACL-8112 Series - Manual (Page 88)

80
• C Language Library
7.21 _8112_TIMER_Start
Description
Timer #0 on the ACL-8112 is freely available to be programmed by the
users. This function is used to program Timer #0. This timer can be
used as a frequency generator if an internal clock is used. It also can
be used as an event counter if an external clock is used.
Syntax
int _8112_TIMER_Start( int timer_mode, unsigned int
c0 )
int _8112pg_TIMER_Start( int timer_mode, unsigned int
c0 )
Argument:
timer_mode: the 8253 timer mode, the possible
values are:
TIMER_MODE0, TIMER_MODE1,
TIMER_MODE2, TIMER_MODE3,
TIMER_MODE4, TIMER_MODE5.
c0: the counter value of timer
Return Code:
ERR_NoError
ERR_BoardNoInit
ERR_InvalidTimerMode
ERR_InvalidTimerValue
Example:
See demo program 'TMR_DEMO.C'