ADLINK DAQe-2006 - Manual (Page 72)

60 Operation Theory
Figure 4-25: Mode 3 Operation
Mode 4: Single Gated Pulse Generation
This mode generates a single pulse with programmable delay
and programmable pulse-width following the software-start.
The two programmable parameters could be specified in terms
of periods of the GPTC_CLK input by software. GPTC_GATE
is used to enable/disable counting. When GPTC_GATE is inac-
tive, the counter halts the current count value. Figure 4-26 illus-
trates the generation of a single pulse with a pulse delay of two
and a pulse-width of four.
Figure 4-26: Mode 4 Operation