1 features, Features – ADLINK DAQe-2006 User Manual
Page 14
2
Introduction
1.1
Features
The DAQ-/DAQe-/PXI-2016/2010/2006/2005 advanced data
acquisition card has the following features:
X
32-bit PCI bus (DAQ/PXI models) or PCI Express (DAQe
model), plug and play
X
4-channel simultaneous differential analog input:
Z
DAQ-/DAQe-/PXI-2010: 14-bit Analog input resolution
with sampling rate up to 2 MS/s
Z
DAQ-/DAQe-/PXI-2005: 16-bit Analog input resolution
with sampling rate up to 500 KS/s
Z
DAQ-/DAQe-/PXI-2006: 16-bit Analog input resolution
with sampling rate up to 250 KS/s
Z
DAQ-/DAQe-/PXI-2016: 16-bit Analog input resolution
with sampling rate up to 800 kS/s
X
Programmable bipolar/unipolar analog input
X
Programmable gain (x1, x2, x4, x8 for all DAQ-20XX)
X
A/D FIFO
Z
DAQ-/DAQe-/PXI-2010: Total 8 K samples
Z
DAQ-/DAQe-/PXI-2005/2006/2016: Total 512 samples
X
Versatile trigger sources: software trigger, external digital
trigger, analog trigger and trigger from System Synchroniza-
tion Interface (SSI).
X
A/D Data transfer: software polling & bus-mastering DMA
with Scatter/Gather functionality
X
Four A/D trigger modes: post-trigger, delay-trigger, pre-trig-
ger and middle-trigger
X
Two-channel DA outputs with waveform generation capabil-
ity
X
2 K samples output data FIFO for DA channels
X
DA Data transfer: software update and bus-mastering DMA
with Scatter/Gather functionality
X
System Synchronization Interface (SSI)
X
Full A/D/DA auto-calibration
X
Completely jumper-less and software-configurable