User manual – 3xLOGIC VISIX Camera User Manual
Page 63
User Manual
| VISIX PTZ Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
55
Set the Alarm Actions for Motion Detection.
Purpose:
You
can
specify
the
linkage
method
when
an
event
occurs.
The
following
contents
are
about
how
to
configure
the
different
types
of
linkage
method.
Figure 6-‐44
Linkage Method
Check
the
checkbox
to
select
the
linkage
method.
Notify
surveillance
center,
send
email,
upload
to
FTP,
trigger
channel
and
trigger
alarm
output
are
selectable.
!
Notify
Surveillance
Center
-‐
Send
an
exception
or
alarm
signal
to
remote
management
software
when
an
event
occurs.
!
Send Email -‐ Send an email with alarm information to a user or users when an event occurs.
NOTE:
To send the Email when an event occurs, you need to refer to Section 6.3.10
Configuring Email Settings to set the Email parameters.
!
Upload
to
FTP
-‐
Capture
the
image
when
an
alarm
is
triggered
and
upload
the
picture
to
a
FTP
server.
NOTE:
You need a FTP server and set FTP parameters first. Refer to Section 6.3.8
Configuring FTP Settings for setting FTP parameters.
!
Trigger Channel -‐ Record a video when an event occurs.
NOTE:
You have to set the recording schedule to realize this function. Please refer to
Section 7.2 Configuring Recording Schedule for settings the recording schedule.
!
Trigger Alarm Output -‐ Trigger one or more external alarm outputs when an event occurs.
NOTE:
To trigger an alarm output when an event occurs, please refer to Section 6.6.5
Configuring Alarm Output to set the alarm output parameters.