User manual – 3xLOGIC VISIX Camera User Manual
Page 22
![background image](/manuals/732791/22/background.png)
User Manual
| VISIX PTZ Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
14
A
preset
is
a
predefined
image
position.
For
the
defined
preset,
you
can
click
the
calling
button
to
quickly
view
the
desired
image
position.
!
Setting a Preset:
Steps:
1) In the PTZ control panel, select a preset number from the preset list.
Figure 4-‐5
Setting a Preset
2) Use the PTZ control buttons to move the lens to the desired position.
!
Pan the speed dome to the right or left.
!
Tilt the speed dome up or down.
!
Zoom in or out.
!
Refocus the lens.
3) Click
to finish the setting of the current preset.
4) You can click
to delete the preset.
NOTE:
You can configure up to 256 presets.
!
Calling a Preset:
In the PTZ control panel, select a defined preset from the list and click
to call the preset.
Figure 4-‐6
Calling a Preset
For
convenient
preset
selection,
refer
to
the
following
steps
to
navigate
to
the
preset
you
want.
Steps:
6) Select
any
preset
from
the
list.
7) Click
the
preset
number
you
need
on
the
keyboard.