3xLOGIC VISIX Camera User Manual
Page 33
User Manual|
VISIX Network Camera
10225 Westmoor Drive, Suite 300, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
33
Figure 6-‐7
Port Settings
2) Set the
HTTP port, RTSP port and HTTPS port of the camera.
!
HTTP Port: The default port number is 80, and can be changed to any port range 1024 to 65535.
!
RTSP Port: The default port number is 554.
!
HTTPS Port: The default port number is 443, and can be changed to any port range 1024 to 65535.
!
Server Port: The default server port number is 8000.
3) Click Save to save the settings.
Note:
A reboot is required for the settings to take effect.
CONFIGURING PPPOE SETTINGS
Steps:
1) Enter the PPPoE Settings interface:
Configuration >Advanced Configuration > Network > PPPoE
Figure 6-‐8
PPPoE Settings
2) Check
the
Enable
PPPoE
checkbox
to
enable
this
feature.
3) Enter
User
Name,
Password,
and
Confirm
password
for
PPPoE
access.
Note:
The User Name and Password should be assigned by your ISP.
4) Click Save to save and exit the interface.
Note:
A reboot is required for the settings to take effect.
CONFIGURING DDNS SETTINGS
Purpose:
If
your
camera
is
set
to
use
PPPoE
as
its
default
network
connection,
you
can
use
the
Dynamic
DNS
(DDNS)
for
network
access.
Before
you
start:
Registration
on
the
DDNS
server
is
required
before
configuring
the
DDNS
settings
of
the
camera.
Steps: