Directed Electronics G322R - Manual (Page 41)

38 © 2 0 0 3 d i r e c t e d e l e c t r o n i c s , i n c .
table of zones
A zone is represented by the number of LED flashes used by the
system to identify a particular type of input. Standard input
assignments are listed in the following table, along with spaces to
write in any optional sensors or switches that you have had
installed.
ZONE
(Number of DEALER-INSTALLED
LED Flashes) DESCRIPTION OPTIONS
1 Instant trigger for optional
hood or trunk pins
2 A heavier impact detected by
the Shock Sensor
3 Door switch trigger
5 Ignition trigger
nuisance prevention circuitry
Your security system has Nuisance Prevention Circuitry ™
(NPC ™ ) to prevent annoying false alarms. This prevents repeti-
tive trigger sequences due to faulty door pinswitches or environ-
mental conditions such as thunder, jackhammers, airport
noise, etc.
Here's how it works: If the alarm is triggered by the same sensor
or switch three times within a 60 minute period, your system
➜
n noottee:: The LED does not report when the Warn Away®
response has been activated; it only reports Triggered
Sequences.
➜