Directed Electronics G322R - Manual (Page 26)

23 © 2 0 0 3 d i r e c t e d e l e c t r o n i c s , i n c .
3. C Ch hoooossee.. Within 10 seconds, press and
release the Valet®/Program switch the number
of times for the desired function. Then press
the switch once more and hold it. The siren
will chirp and the LED will flash to confirm
the selected channel. Do not release the
Valet®/Program switch.
4. T Trraan nssm miitt.. While holding the
Valet®/Program switch, press the desired
button to be programmed on the transmitter.
5. R Reelleeaassee.. Once the button is learned, the
siren will chirp, confirming transmitter
programming. The Valet®/Program switch can
now be released.
C Ch haan nn neell n nu um mb beerr F Fu un nccttiioon n
1 Auto Learn
2 Arm/Disarm
3 Channel 2 Output
4 Channel 3/Remote Start
5 Delete all Transmitters