Directed Electronics G322R - Manual (Page 37)

34 © 2 0 0 3 d i r e c t e d e l e c t r o n i c s , i n c .
manual valet mode
T Too een ntteerr oorr eexxiitt V Vaalleett M Mood dee w wiitth h tth hee V Vaalleett ® ® //P Prrooggrraam m ssw wiittcch h::
1. Turn the ignition on.
2. Turn the ignition off.
3. Press and release the
Valet ® /Program switch
within 10 seconds.
The status LED will light steady if you are entering Valet Mode
and will turn off if you are exiting Valet Mode.
remote valet
You can also enter or exit Valet Mode by using the remote
transmitter:
1. Open any vehicle door.
2. Press .
3. Press .
4. Press again.
The status LED will light steady if you have entered Valet Mode
and will turn off if you have exited Valet Mode.
note: In Valet Mode the LED will turn off if the ignition
is turned ON. The LED will turn back on if the ignition
is turned OFF. This notifies you that the system is still in
Valet Mode.
➜
DRW-35
➜