DAVIS DRIVERIGHT 600 8156VSS - Manual (Page 14)

10
D ATA S CREENS
The following section explains all the information and options avail-
able in the various data screens. In addition to the options listed in
the individual sections below, in every screen you have the follow-
ing two options:
❏ Move to the next Data Screen
Press and release MODE.
❏ View the Settings Screens
Press and hold MODE.
Current Readings Screen
The current readings screen displays constantly updating (as long as
the car is moving) speed, distance (for the current trip), and acceler-
ation/deceleration readings (acceleration is positive, deceleration is
negative). The current date (or time) is also displayed on this screen.
Current Readings Screen
You have the following options from the Current Readings Screen:
❏ Toggle Between Date and Time Display
You may display either the date or the time. To toggle
between the two, press and release SET/CLEAR.
❏ Change Units of Measure
To change the units of measure in which data is displayed
from metric to U.S. units (or vice versa), press and hold
SET/CLEAR for approximately 2 seconds. This does not
change the date or time display format.
❏ Specify Trip Type
There are four types of trips stored by the DriveRight 600:
Business, Personal, Commute, and Other. The trip type is
stored along with the rest of the trip information and is
automatically saved when information is downloaded
using the software.
km/h
SPEED
ACCEL
G
DISTANCE
K m
CURRENT
Current Speed Date (or Time)
Distance Travelled
on Current Trip
Current Acceleration
(or Deceleration)
DAY.MO
DR600 UG Rev B D008.fm Page 10 Thursday, April 17, 2003 7:17 AM