Aiwa Z-VR55 - Manual (Page 4)

PREPARATIONS
The DOLBY PRO LOGIC system which is the biggest feature of
this stereo system provides you with multichannel sound in your
home.
Complete setting and connection of the main unit, supplied
speakers, yourTV and video equipment according to the foilowing
procedure.
POSmOMING THE SPEAKERS
To achieve the optimum effects obtainable with the DOLBY PRO
LOGIC system, it is important to position the speakers properly.
Refer to the following illustration to find out the best location in
your room.
© © ©
© Front speakers
(D Center speaker
Position in the center of the two front speakers, in addition,
position on or below the TV set, if connecting a TV set to the
unit.
(3) Surround speakers
Place the surround speakers directly to the side of or slightly
behind the listening area. Align them horizontally, about 1
meter above ear height.
• No sound is heard from the center and surround speakers when
the DOLBY PRO LOGIC the DSP SURROUND system and
the 5.1 CH (page 20) are set to off.
• The sound is heard from the center speaker when the DOLBY
PRO LOGIC or the 5.1CH (page 20) is set to on.
CONNECTIONS
Check the AC voltage
The rated voltage of your unit shown on the rear panel is 120 V
AC. Check that the rated voltage matches your local voltage.
IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord in the end.
Speakers
There are no difference between the front speakers as well as
the surround speakers. Both speakers of its kind can be
connected as L (left) or R (right).
Surround speaker
1
Front speaker(L)
AC cord
ENGLISH