Aiwa CX NMA545 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
nmE]
Speaker system SX-WNA555
Main unit CX-NMA545
FM tuner section
Tuning range
Usable sensivity (IHF)
Antenna terminals
AM tuner section
Tuning range
Usable sensitivity
Antenna
Amplifier section
Mid-high frequency amplifier
Power output
Total harmonic distortion
Low frequency amplifier
Power output
Total harmonic distortion
Inputs
Outputs
Cassette deck section
Track format
Frequency response
Recording system
Heads
87.5 MHz to 108 MHz
13.2 dBf
75 ohms (unbalanced)
530 kHz to 1710 kHz (10 kHz step)
531 kHz to 1602 kHz (9 kHz step)
350 pV/m
Loop antenna
Front
15 W + 15 W (200 Hz - 20 kHz,
THD less than 1%, 8 ohms)
0.07 % (10 W, 1 kHz, 8 ohms, DIN
AUDIO)
35 W + 35 W (20 Hz - 200 Hz, THD
less than 1 %, 4 ohms)
0.07 % (25 W, 135 Hz, 4 ohms, DIN
AUDIO)
Rear (Surround)
10W + 10W(1 kHz, THD less than
1 %, 8 ohms)
Center
20 W (1 kHz, THD less than 1%, 8
ohms)
VIDEO/AUX: 300 mV (adjustable)
MIC: 1.0 mV (10 k ohms)
SPEAKERS HIGH FREQ:
accept speakers of 8 ohms or more
SPEAKERS LOW FREQ:
accept speakers of 4 ohms or more
SURROUND SPEAKERS:
accept speakers of 8 ohms to 16
ohms
CENTER SPEAKER: accept
speakers of 8 ohms or more
PHONES (stereo jack): accepts
headphones of 32 ohms or more
4 tracks, 2 channels stereo
50 Hz - 15000 Hz
AC bias
Deck 1: Playback head x 1
Deck 2: Recording/playback head
X 1, erase head x 1
Compact disc player section
Laser
D-A converter
Signal-to-noise ratio
Harmonic distortion
Wow and flutter
Semiconductor laser
{ X =
780 nm)
1 bit dual
85 dB (1 kHz, 0 dB)
0.05 % (1 kHz, 0 dB)
Unmeasurable
Cabinet type
Speakers
Impedance
Output sound pressure level
Dimensions (W x H x D)
Weight
2 way, subwoofer (magnetic
shielded type)
Subwoofer:
160 mm (6 % in.) cone type
Full range:
100 mm (4 in.) cone type
4 ohms/8 ohms
87 dB/W/m
240
X
324
X
275 mm
(9
V2
X
12
Vs
X
10
Vs
in.)
4.8 kg (10 lbs 9 oz.)
Specifications and external appearance are subject to change without
notice.
DOLBY PRO LOGIC
Manufactured under license from Dolby Laboratories Licensing
Corporation.
“DOLBY”
and
“PRO
LOGIC”
are
trademarks
of
Dolby
Laboratories Licensing Corporation.
COPYRIGHT
Please check the laws on copyright relating to recordings from
discs, radio or external tape for the country in which the machine
is being used.
NOTE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions,
may
cause
harmful
interference
to
radio
communications.
However,
there
is
no
guarantee
that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
CAUTION
Modifications or adjustments to this product, which are not
expressly approved by the manufacturer, may void the user’s
right or authority to operate this product. ■
General
Power requirements
Power consumption
Dimensions of main unit
(W x H x D)
Weight of main unit
120 VAC, 60 Hz
170 W
260 X 330 X 355 mm
{IOV4X 13x 14 in.)
8.1 kg (17 lbs 14oz)
28
ENGLISH