Aiwa CX NMA545 - Manual (Page 12)

PRESEniNG STATION
■TUNER
BAND
■0-9,-HO
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
PRESET NUMBER TUNING
Use the remote control to select the preset number directly.
1 Press TUNER BAND to select a band.
2 Press numbered buttons 0-9 and -t-IO to select a
preset number.
Example:
To select preset number 20, press ■^10, -t-10 and 0.
To select preset number 15, press -flO and 5.
Selecting a preset number on the main unit
Press TUNER BAND to select a band. Then, press ► repeatedly
or turn MULTI JOG.
Each time ► is pressed, the next ascending number is selected.
To clear a preset station
Select the preset number of the station to be cleared. Then, press
■ CLEAR, and press II SET within 4 seconds.
The preset numbers of all other stations in the band with higher
numbers are also decreased by one.
1 Press TUNER BAND to seiect a band, and press
◄◄ DOWN or ►► UP to seiect a station.
2 Press II SET to store the station.
A preset number beginning from 1 in consecutive order for
each band is assigned to the station.
N
Preset number
1 ^
3 Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
for all the bands have already been stored.
“FULL” is displayed if you attempt to store more than 32 preset
stations.
1 2
ENGLISH