Connecting optional equipment, 1 press video/aux/phono on the main unit, 2 adjust the volume to minimum – Aiwa CX-ZL10 User Manual
Page 18: 3 play the turntable, 4 adjust the volume according to your preference, Video/aux/phono in jacks, When connecting a turntable, Cd digital out (optical) jack
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

TURNTABLE
OTHER CONNECTIONS
CONNECTING OPTIONAL EQUIPMENT
■CD DIGITAL OUT
(OPTICAL)
■ VIDEO/AUX/
PHONO IN
Preparation
• Connect the supplied stereo turntable to the main unit. (See
page 5)
• Set
EQUALIZER AMP
on the turntable to ON position. (Refer
to the operating instructions of the turntable for details.)
Refer to the operating instructions of the connected equipment
for details.
• The connecting cords are not supplied. Obtain the necessary
connecting cords.
• Consult your local Aiwa dealer for optional equipment.
1 Press VIDEO/AUX/PHONO on the main unit.
“VIDEO" appears on the display.
The source name on the display can be changed to “PHONO”.
(See “LISTENING TO EXTERNAL SOURCES” on page 19.)
2 Adjust the volume to minimum.
Turn
VOLUME
counterclockwise until “VOL 0” is displayed.
3 Play the turntable.
Refer to the operating instructions of the turntable for details.
4 Adjust the volume according to your preference.
VIDEO/AUX/PHONO IN JACKS
This unit can input analog sound signals through these jacks.
Use a cable with RCA phono plugs to connect audio equipment
(LD players, MD players, VCRs, TV, etc.).
Connect the red plug to
VIDEO/AUX/PHONO IN R
jack, and the
white plug to
VIDEO/AUX/PHONO IN L
jack.
When connecting a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
CD DIGITAL OUT (OPTICAL) JACK
This unit can output CD digital sound signals through this jack.
Use an opticai cabie to connect digital audio equipment (DAT
deck, MD recorder, etc.).
Remove the dust cap (D from the
CD DIGITAL OUT (OPTICAL)
jack. Then, connect an optical cable plug to the
CD DIGITAL
OUT (OPTICAL)
jack.
When the CD DIGITAL OUT (OPTICAL) jack is not being
used
Attach the supplied dust cap.
18
ENGLISH