Aiphone RA-A - Manual (Page 4)

RAX RCX
10 ALL CALL
To page through all intercom stations;
(1) Press [X] button. (1) Press dX and H button (and [>0 button,
if call back is required).
(2) Make announcement while depressing and holding 3] button, (*)
(3) Wait for call back. OR If call back is not desired, press [X] button.
11 CALL BACK TO ALL CALL
(1) Press [X] button at the nearest station. (1) Press [X] and XD buttons at the nearest station.
12 GROUP CALL
To page through a group of intercom stations;
(1) Press dX and a group number button [XI ~ [X]
(and dX button, if call back is required).
(2) Make announcement while depressing and
holding [T] button. (*)
(3) Wait for call back. OR If call back is not desired,
press
[X]
button.
13 CALL BACK TO GROUP CALL
(1) Press [X] and dX buttons at any station of a
group paged.
*WHEN YOUR SYSTEM INCLUDES DEVICES, SUCH AS INTERNAL/EXTERNAL LIGHTS, DOOR RELEASE ETC.
14 REMOTE OPERATION OF EXTERNAL DEVICES
(1) Press dX button and zone number button ( [T] , dX , dX or [XJ ),
(2) Momentarily press 31 button. (*)
* If you hear intermittent tone, the external device is in ON mode.
* If you hear a continuous tone, the external device is in OFF mode,
(3) Depress [o] button to reverse ON/OFF mode of internal/external lights, etc. OR
Depress and hold [X] button to activate electric door release, etc.
(4) Press dX] button.
15 CONFERENCE CALL To initiate a conference call;
(1) Press number button of each station to be included
and dX button after each (up to 5 stations).
(2) Initiator depresses and holds down (*)
3
] button
and begins conversation.
(3) The called stations must depress and hold down
31
button (*) to respond,
(4) The called stations press dX button to get out of
the conference.
At conclusion of the conference, initiator must
press
[Xdl
button.
(*) In RA-A and RA-D, TALK button in handset works for [T) (TALK) button on the dial key pad.
- 4 -