Wiring, Terminal definitions, Call tone adjustment – Aiphone LEF-3 User Manual
Page 4: Selector switch for intermixing with lap modeis
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
![background image](/manuals/726085/4/background.png)
WIRING------------
LEF-3 LEF-5, 10, 10S
im
c©
1
©
2
©
3©
B©
Y ©
O
' LEW-5, LEW-10, and LEW-1 OS Terminal boxes are not equipped with K1
~ K5, K1 ~ K10 terminals.
LEF-10S
Front case
back view
Red Yellow Yellow
Speaker
LEW-5
( 5 )
@ 1
0
s ©
© 3
8 ®
© 4
9 ©
I © 5
1 0 ®
F
| © c
W\
| I 0 V ^ L 0 | |
LEW-10
LEW-1 OS
' Shorting link on E and - terminal: Must remain attached in
a single-master system. Remove when 2 or more masters
are in a system.
Terminal definitions
1
~
10
:
E:
C:
R:
Y:
L:
+j
PI:
P2, P3:
Station number, establishes communication to other LEF masters (to “C”
terminal) or LE subs (to “1” terminai)
Common communication line
“CALL”, Call receive from another master (and All Call/Chime/Music
reception)
Activates occupied LED to indicate when any master is ON (line drops to
OV DC when any master is on.)
Occupied mode control during All Call (becomes -
f
9V DC during All Call)
Door strike activation (becomes -
f
12V DC when “key” button is pressed)
12V DC power supply connection
All Call control (becomes -
f
IOV DC when All Call button is pressed and
activates pretone)
All Call transmit audio path from initiating master to BG-10C
★ K1 ~ K5 (LEF-5), K1 ~ K10 (LEF10,10S): Selective control terminal, used for video control with
MY PanTilt series, or for selective door release (w/RY-PA) from the master to multiple doors. (“K#”
terminal becomes ground (-) when corresponding station number is pressed.)
■ Call tone adjustment
3-position adjustment switch, located under directory cover plate.
■
y y y y y y
-3-pos.
LEF-3
Selector switch for intermixing with LAP modeis
If intermixing LEF with LAF models (except LAF-B), change
setting from B to A position on all LEF models.
* If a call tone is desired when a sub station calls in and the
system is occupied, change the switch on the LEF
masters to the A position.
“A” pos.: Mutes call tone at master while system
is in occupied mode.
“B" pos.: Call tone is heard when master is in
occupied mode.
FRONT CASE
BACK VIEW
3-pos.
LEF-5,10,103
(when shipped)
A
(when intermixing
T
with LAF)
- 4 -