Cortelco 2750 - Manual (Page 39)

34
6.2 Redial
6.2.1 To redial the last phone number dialed
a. Go off-hook by lifting the handset, pressing SPEAKER, pressing HEADSET, or by
pressing the desired LINE button.
b. Press REDIAL.
6.2.2 To redial any of the last five phone numbers dialed
The Redial feature enables viewing or redialing of any of the last five telephone numbers dialed. This
also shows the time, date and duration of each call.
a.
With the phone on-hook and idle, press REDIAL. The display will show the last number
dialed, the time and date of the call, and its duration.
b. Press the right arrow button under the display repeatedly to scroll through a list of the last
five numbers dialed along with the time, date, and duration.
c. Go off-hook at any time to dial the displayed number.
6.3 Hold
6.3.1 Placing a Call on Hold
To place an outside call on Hold, press HOLD. To take the call off hold, press the line button of the
line on hold. While a caller is on hold, the handset can be hung up without disconnecting the call.
When a call is on hold, it can be removed from hold by any telephone connected to that line simply by
accessing the line. If a call remains on hold after 2 minutes, your 2750 will alert you. See Section 4.4.
Note: Intercom calls cannot be put on hold.
6.3.2 Making a call on another line
To make a call on a second line while having a conversation, press HOLD to place your first call on
hold and then press another LINE button. A call may now be made on the second line. Press the first
LINE button to return to the first call. This will disconnect the second call. To keep the second call, it
must be placed on hold before returning to the first call. This can be done multiple times during a call.
6.3.3 Answering a call on another line
If there is an active call on one line and a call comes in on another line, the incoming line lamp will
flash and the 2750 will sound a double ring every 15 seconds. If the incoming line is set to ringer off,
the double ring will not sound.
The incoming call may be answered by pressing the flashing LINE button. This will disconnect the
original call unless it is placed on hold.
6.4 Conference
The 2750 allows conference calls with two other parties. These may be either two outside lines or one
outside line and one intercom station.