Cortelco 2750 - Manual (Page 32)

27
5.2.4 Record the Auto Attendant Zero-Out OGM
This is the message callers hear if they press “0” while listening to the Auto Attendant Message.
a.
Press MENU
b. Press DOWN ARROW repeatedly until “Answer Setting” appears in the display.
c. Press the soft key under ENTER. “Ans System: ON” will appear in the display.
d. Press DOWN ARROW repeatedly until “OGM Setup” appears in display.
e. Press the soft key under ENTER. “Ans OGM” will appear in display.
f. Press DOWN ARROW until “AA Zero-Out OGM” appears in display.
g. Lift handset and press RECORD button to start recording. The display will read “Confirm”
with options of NO (Down Arrow) or YES (Select Key).
h. Press Yes. The unit will play a message of “Please record a greeting after the tone.”
i. Press STOP to end recording.
j. Press MENU to exit.
5.2.5 Setting Auto Attendant Pickup Delay
This setting determines how long the Auto attendant will ring before picking up incoming calls. The
number may be between 0 and 8 rings. If 0 is chosen, incoming calls will not ring until after
processing by the Auto Attendant.
Note: If the Auto Attendant Pickup Delay is set to “0,” Toll Saver must be set to OFF.
To Set Auto Attendant Pickup Delay
a.
Press MENU
b. Press DOWN ARROW repeatedly until “Answer Setting” appears in the display.
c. Press the soft key under ENTER
d. Press DOWN ARROW repeatedly until “AA Delay” appears in the display.
e. Press the soft key under CHANGE to set delay time
f. Press MENU to exit.
5.2.6 Night Timer Set
The Night Timer determines when the AA Night OGM will play. The default settings start at 5:00PM
and end at 9:00AM. To change these timer settings
a.
Press MENU
b. Press DOWN ARROW repeatedly until “Answer Setting” appears in the display.
c. Press the soft key under ENTER
d. Press DOWN ARROW repeatedly until “Night Timer Set” appears in the display.
e. Press the soft key under ENTER , “Start (XX:XX) PM” will appear in the display
f. Press the soft key under CHANGE and use key pad to input time, use soft key to set AM/PM
g. Press DOWN ARROW, display will show “End (XX:XX) AM “
h. Press the soft key under CHANGE and use key pad to input time, use soft key to set AM/PM
i. Press MENU to exit.