Cortelco 2750 - Manual (Page 27)

22
d. Press the soft key under ENTER. “Memory Dials” will appear in the display.
e. Press the soft key under ERASE. After a brief pause, the display will read “Erasing
Done!”
4.8 Erase Toll Restrictions
At station #01
a.
Press MENU
b. Press DOWN ARROW repeatedly until “Advanced Setting” appears in the display
c. Press the soft key under ENTER. “Erase Memory” will appear in the display.
d. Press DOWN ARROW repeatedly until “Erase Toll Restr” appears in the display.
e. Press the soft key under ENTER
f. Press the soft key under ERASE. After a brief pause, the display will read “Erasing
Done!”
4.9 Erase All Feature Settings
To erase all the feature settings stored at a particular station and return that telephone to its original
factory settings. This will not erase any numbers from the directory or the memory dial.
a.
Press MENU
b. Press DOWN ARROW repeatedly until “Advanced Setting” appears in the display
c. Press the soft key under ENTER. “Erase Memory” will appear in the display.
d. Press DOWN ARROW until “Erase Settings” appears in the display.
e. Press the soft key under ENTER
f. Press the soft key under ERASE. After a brief pause, the display will read “Erasing
Done!”
4.10 Reset Default Settings
To reset the 2750 to factory default settings press MENU, MUTE, MUTE, 2, 7, 4, 1.
5. ANSWERING SYSTEM
5.1 Setting Answering Option
The 2750 can function as an Answering Machine or as an Auto-Attendant. The answering system can
store approximately 60 minutes of incoming messages, memos and outgoing messages (OGMs). If the
answering system is full and cannot store any more messages, the display will show the message
“Memory Full!”
There are only two steps to set up your answering machine. First, turn on the
answering system and second, record your OGM.
5.1.1 Turn on Answering Machine
a. Press MENU
b. Press DOWN ARROW repeatedly until “Answer Setting” appears in the display.