Aiphone PANTILT DOOR STATION MY-DC/A - Manual (Page 3)

PRECAUTIONS ON INSTALLATION & WIRING
I Wiring
Parallel cable
Extra wires
120£J &
\
120i2
Use 2-conductor (parallel) cable.
Coaxial cable or 2 separate wires
should not be used.
irjl'l A1
iJill) A21K“
MY-DC/A,
MY-DG/A
■"41
U
MY-1CD,
etc.
★ When existing chime wires are used, it is possible that the wires
may contain AC voltage current. Locate and remove the bell
transformer before actually connecting MY-DC/A or MY-DG/A.
★ Extra pair(s) in the installed cable can affect image quality, and must
be terminated with a 120 ohm resistor at each end of wires at both
MY-DC/A or MY-DG/A and inside monitor(s).
WIRING--------------------------------
Installation
strong light source
MY-DC/A and MY-DG/A employ a
CCD camera, and its performance can
be affected by bright direct light, such
as strong sunlight, gate light or street
or porch light which is directed into the
camera lens. Use backlight button to
compensate for silhouetted images.
MY-DC/A
MY-1CD
MYW-BA MY-2CD MYW-P3L
MYW-P3CB TB-ADM10
1A1
1A2
1A1
1A2
2A1
2A2
1st MY
video door
2nd
3A1
3A2
3rd
1A1 4A1
1A2 4A2
2A1
2A2
3A1
3A2
10A1
10A2
MOUNTING ------------------
■ Semi-flush mounting
1. Unlock front cover at bottom, using the tool supplied.
2. Attach the mounting bracket to 3-gang box.
3-gang box
MY-DC/A
Polycarbonate
cover
3. Mount MY-DC/A or MY-DG/A unit on the bracket,
fastening 2 screws.
4. Replace front cover and click the tip to lock.
MY-DG/A
Aluminium
cover
1 Surface-mounting (MY-DC/A only)
1. Mount the MYW-R box on wall or single-gang box.
2. Attach MY-DC/A with 2 mounted screws. Mounting
bracket is not used.
MYW-R; 188 Hx118 WX36 D (mm).
Weight lOOg (0.22 lbs.) approx.
7-3/8”H X 4-5/8”W X 1 -3/8"D.
MYW-R
-
3
-