Canon A20 - Manual (Page 72)

70
2
Connect the direct interface
cable to the printer and to the
camera.
When disconnecting the cable from the
camera’s Digital terminal, be sure to hold the
connector at its sides and pull it straight out.
Digital Terminal
• Two direct interface cables are included
with the Card Photo Printer CP-10. Use
only the DIF-100 cable with
mark on
the connector (The Digital Camera Photo
Printer Kit CPK-A10 includes the Direct
Interface Cable DIF-100 only.).
• When connecting the cable to the
camera’s Digital terminal, connect the
cable end marked
to the Digital
terminal. Ensure that the mark faces
the rear of the camera (monitor side).
Direct Interface Cable DIF-100
3
The camera power is turned
on and set the mode dial to
.
If the printer is correctly connected, the
icon will appear on the LCD
monitor.
• For information about how to load paper
and ink cassettes into the printer, refer to
the printer’s
User Guide.