Canon A20 - Manual (Page 106)

104
Troubleshooting
Problem Cause Solution
Press the main switch for a few moments.
Be sure these covers are closed securely.
Reload the batteries in the correct
direction.
• Replace with new alkaline or fully
recharged batteries (four AA-size
batteries).
• Use a household power source.
Use only new AA-size alkaline batteries
that are equivalent to those that came
with the camera or Canon AA-size NiMH
batteries.
Wipe the battery terminals with a clean
dry cloth.
Turn the mode dial to (Auto),
(Manual), or (Stitch Assist).
The camera doesn’t
function (no power).
The camera doesn’t
shoot.
The camera is turned off.
The battery cover or CF card
slot cover is open.
Batteries are loaded in the
wrong direction.
Batteries are depleted.
Batteries are not the right type.
Batteries are not making good
electrical contact with the
camera.
The mode dial is set to
(Replay).