Canon A20 - Manual (Page 26)

24
Setting the Date and Time
If the Set Date/Time menu appears when
you turn on the camera, this means that
the date battery has run down and the
camera date/time clock has stopped
running. Replace the date battery
(
p. 94), then reset the date and time as
explained below.
The Set Date/Time menu also appears the
very first time you turn on the camera. To
make the date/time settings the first time you
turn the camera on, begin from Step 6.
4-6 3, 7
1
2
1
Press the main switch to turn
on the camera (
p. 28).
2
Turn the mode dial to , ,
or .