Carriage locks, Rear wheel width, Seat adjustment – Bolens 140-990A User Manual
Page 12: Operating the tractor
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
FIGURE 16.
Carriage Locks
The carriage locks hold the quick disconnect
frame in the raised position when the rear at
tachments are used.
Remove the carriage locks, raise the quick discon
nect frame by hand and reassemble the carriage
locks to the inside so they hold the quick dison-
nect frame up. (See figure 17.)
Carriage
Lock
Rear Wheel Width
The rear wheels can be reversed to increase or
decrease the width. To reverse the wheels, raise
the back of the tractor and block it well. Remove
the four lug bolts holding the rim to the rear axle
hub. Reverse the wheel and reassemble. (See
figure 19.)
FIGURE 17.
FIGURE 19.
Seat Adjustment
The seat is adjustable to four positions. Remove
the bolt holding the seat to the spring to change
positions. (See figure 18.)
Operating the Tractor
1. Start the engine as outlined in the Engine
Operating and Maintenance manual.
12