Aiwa CX-NA303 - Manual (Page 8)

RADIO RECEPTION
MANUAL TUNING
I
PRESETTING STATIONS
■MONO
TUNER
■BAND
■SHIFT
ooo
ooo
oo
ooo
o
eoo||
¿00
O
-0-9,+10
-BAND
■SHIFT
1 Press TUNER/BAND repeatedly to select the
desired band.
FM- AM
When TUNER/BAND is pressed while the power is off, the
power is turned on directly.
To select a band with the remote control
Press BAND while pressing SHIFT.
2 Press •« DOWN or ►► UP to select a station.
Each time the button is pressed, the frequency changes.
When a station is received, “TUNE” is displayed for 2 seconds.
During FM stereo reception, ll(®H) is displayed.
TUNE |i(®iil
I I
/77 ^
To search for a station quickly (Auto Search)
Keep ◄◄ DOWN or UP pressed until the frequency starts
to change rapidly. After tuning in to a station, the search stops.
To stop the Auto Search manually, press ◄◄
DOWN or ►► UP.
• The Auto Search may not stop at stations with very weak signals.
When an FM stereo broadcast contains noise
Press MONO TUNER on the remote control while pressing SHIFT
so that “MONO” appears on the display.
Noise is reduced, although reception is monaural.
To restore stereo reception, press these buttons so that “MONO”
disappears.
To change the AM tuning intervai
The default setting of the AM tuning interval is 10 kHz/step. If
you use this unit in an area where the frequency allocation system
is 9 kHz/step, change the tuning interval.
Press
POWER while pressing TUNER/BAND.
To reset the interval, repeat this procedure.
The unit can store a total of 32 preset stations. When a station is
stored, a preset number is assigned to the station. Use the preset
number to tune in to a preset station directly.
1 Press TUNER/BAND to select a band, and press
◄◄ DOWN or ►► UP to select a station.
2 Press II SET to store the station.
A preset number beginning from 1 in consecutive order for
each band is assigned to the station.
Preset number
1
Repeat steps 1 and 2.
The next station will not be stored if a total of 32 preset stations
for all the bands have already been stored.
NOTE
When the AM tuning interval is changed, all preset stations are
cleared. The preset stations have to be set again.
7
ENGLISH