Al edit recording, To stop recording, To clear the edit program – Aiwa CX-NA303 User Manual
Page 14: To check the order of the programmed track numbers, To add tracks from other discs to the edit program, Time on cassette tapes and editing time
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Al EDIT RECORDING
3,7
3,7
The Al edit recording function enables CD recording without
worrying about tape length and track length. When a CD Is
inserted, the unit automatically calculates the total track length.
If necessary, the order of tracks is rearranged so that no track is
cut short.
(Al: Artificial Intelligence)
Al edit recording will not start from a point halfway into the tape.
The tape must be recorded from the beginning of either side.
1 Insert the tape into deck 2.
Insert the tape with the side to be recorded on first facing out
from the unit.
2 Press CD and load the disc(s).
3 Press EDIT/CHECK once while pressing SHIFT
on the remote control.
“EDIT” is displayed.
EDIT
3
• When “PRGM” is displayed, press EDIT/CHECK while
pressing SHIFT again.
4 Press DISC DIRECT PLAY 1-3 to select a disc.
5 Press numbered buttons 0-9 on the remote
control to designate the tape length.
10 to 99 minutes can be specified.
Example: When using a 60-minute tape, press
6
and
0.
In a few seconds, the tracks to be recorded on each side of
the tape are determined.
•
►► or MULTI JOG are also available to designate
the tape length.
Tape length
...V'-.'
Remaining time Programmed
of recording tracks for side A
I
I
6 Press # REC/REC MUTE to start recording on
the first side.
The tape is rewound to the beginning of the first side, the
lead segment is played through for
10
seconds, and recording
starts. When the last track programmed for side A is finished,
deck 2 enters the recording stop mode. After entering the
recording stop mode, go to step 7.
7 Press EDIT/CHECK while pressing SHIFT on the
remote control to display the program for the
second recording.
B is displayed.
8 Turn over the tape in deck 2 and press • REC/
REC MUTE to start recording on the second side.
To stop recording
Press ■. Recording and CD play stop simultaneously.
To clear the edit program
Press ■
CLEAR
twice so that “EDIT” disappears on the display.
To check the order of the programmed track numbers
Before recording, press
EDIT/CHECK
while pressing
SHIFT
on
the remote control to select side A or B, and press or
repeatedly.
Programmed
Track number
track numbers
I
:9
Program number
To add tracks from other discs to the edit program
If there is any time remaining on the tape after step 5, you can
add tracks from other discs in the CD compartment.
1
Press
EDIT/CHECK
while pressing
SHIFT
on the remote
control to select side A or B.
2
Press
DISC DIRECT PLAY 1-3
to select a disc.
3
Press numbered buttons on the remote control to select tracks.
A track whose playing time is longer than the remaining time
cannot be programmed.
4 Repeat steps 2 and 3 to add more tracks.
Time on cassette tapes and editing time
The actual cassette recording time is usually a little longer than
the specified recording time printed on the label. This unit can
program tracks to use the extra time. When the total recording
time is a little longer than the tape’s specified recording time
after editing, the display shows the extra time (without a minus
mark), instead of the time remaining on the tape (with the minus
mark).
The Al edit recording function cannot be used with discs
containing 31 tracks or more.
Tape side
A: First recording side
B: Second recording side
1 3
ENGLISH