Buffalo Technology WLA-L11G - Manual (Page 29)

Page B-A
3) Select the "AppleTalk" tab and place a check in the box beside "Make
AppleTalk Active" (Picture B-9).
TCPyiP AppleTalk ^ Proxjes ; AirPort
Make AppleTalk AcTive
Picture B-9
4) Select the "TCP/IP" tab (Picture B-10).
Beside "Configure", select "Manually".
The numbers for "IP Address", "Subnet mask", "Router address",
"Name server addr", and in some cases "Search domains", must
be supplied by your network administrator or your ISP (if your WLA-L11G
is connected to an ISP’s modem or router).
Type in your network/ISP numbers, select "Apply" and close the window.
You should now be connected to your network.
' TCP/IP Ì AppleTalk Proxies
]
AirPort
Configure; Manoally
(P Address: &i. 222.84.86
S u b n e t M a s k : 2 S 5 . 2 S 5 . 2 S 5 . 2 4 S
Rooter;
222
.
84.81
Domain Name Servers (Optiojnail
205
.
177
.
10.10
159.0.216.222
Search Domains iOpriOAjI)
Picture B-10
*11 Mbps is the IEEE 802.11g standard theoretical maximum data transfer rate. Actual wireless network throughput is limited by environmental and system factors and will be less.