Buffalo Technology WLA-L11G User Manual

Page 24

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Page A-3

Part Two: Networks that require an assigned unique IP address for each

computer (Static IP setup).

1) Go to the Apple icon in the top left corner of your Desktop screen.
Scroll down to "Control Panels", then to "TCP/IP" and select.

Go to "Connect via" and select "AirPort". (Picture A-5)

Beside "Configure”, select "Manually".

The numbers for ”IP Address", "Subnet mask", "Router address",

"Name server addr", and in some cases "Search domains", must

be supplied by your network administrator or your ISP (if your WLA-L11G
is connected to an ISP's modem or router).

Type in your network/iSP numbers, close the window, and select "Save".

CcfwKtvi*. I

Picture A-5

Him»

177.10.10

t n C 2 i i 2 2 i

2) Go to the Apple icon in the top left corner of your Desktop screen.

Scroll down to "Control Panels, then to "AppleTalk” and select.

Go to "Connect via" and select "AirPort" (Picture A-6).
Close the window and select "Save".

□

AppleTalk

Connect via: | AirPort

Picture A-6