Buffalo Technology WLA-L11G - Manual (Page 12)

Page 10
Picture 19
8) Restricting which MAC addresses may access the WLA-L11G.
8.1) On the left side of the Advanced Settings screen, select "Wireless LAN
Restrictions" (Picture 19).
Expanding
Routing
Packet Filter
Wiieless LAN Restiictions
AP Coinimuucation
Radio Haidwaie Settings
8.2) Place a check in the box beside "permit connection" and select
"Change" to set your wireless computer's MAC address as an authorized
connection (Picture 20). Select "Return".
Note: if there is more than one MAC address showing at this point,
another computer is already connected to the WLA-L11G.
If this is the case, open your AirPort Control Panel to find your MAC address
beside "AirPort ID" (Picture 21). Place a check beside that MAC address
only and select "Change". Select "Return".
Authorized Hireless LAN PCs
IVIAC address Change
Unauthorized weless LAN PCs
MAC address Change
00:30:65:10:3D:2D Opeimit connection
Picture 20
[ Ct>«fne|| Checic all otunamhorized PCs') | look for Wireless IAN Computcr(s)|
AirPort ID: 00 30 65 10 3D 2D
Picture 21
The screen will now show your MAC address as authorized (Picture 22).
Autlioiized wii eless LAN PCs L
MAC addiess Change Picture 22
00:30:65:10:3D:2D Dinliibit coimection.