Casio YC-430 PJ User Manual
Page 31
31
GETTING READY
■
Battery Power Conservation Features
The camera is equipped with two features for conserving battery
power, as described below.
1.
Press [MENU].
2.
Use [
W] and [X] to select the “Set Up” tab.
3.
Use [
S] and [T] to select the item you want to
configure (“Sleep” or “Auto Power Off”) and
then press [
X].
Turning On Power for the First Time
The first time you load a battery into the camera, a screen
appears for configuring screen text language, date, and time
settings. Use the procedure under “Configuring Display
Language, Date, and Time Settings” in the “MULTI PJ
CAMERA/Multifunctional Camera System YC-430 User’s
Guide” to configure the settings correctly.
IMPORTANT!
• Failure to set the date and time will cause the wrong
date and time data to be recorded with images.
• Leaving the camera for about one day with no power
supplied will cause the date and time settings to be
cleared. You will have to re-configure the settings after
power is restored. The following conditions will result in
no power being supplied to the camera.
– Battery not loaded or dead battery
– Battery not loaded or dead battery with the camera
on the cradle, but without the cradle plugged into a
power outlet
• If you make a mistake when configuring the language,
date, and time settings, you can change the settings
Feature
Name
Description
Settings
Sleep
In the REC mode, the monitor screen
turns off (goes into a sleep state) if no
operation is preformed for a preset
amount of time. Press any button to
turn the monitor screen back on.
Note that the Sleep feature does not
operate in the PLAY mode.
30 sec,
1 min,
2 min,
Off
Auto Power
Off
Power it turned off if no operation is
performed for a preset amount of
time.
2 min,
5 min