Casio YC-430 PJ - Manual (Page 210)

210
USING THE CAMERA WITH A COMPUTER
2. Connect the USB cable that comes bundled
with the camera to the USB cradle and the
USB port of your Macintosh.
• Orient the USB plug so it correctly matches the shape of
the USB port when you connect them.
• Plug the USB cable into the ports securely, as far as it will
go. Proper operation is not possible if connections are not
correct.
3. Press the camera’s [ON/OFF] button to turn it
on and then press [MENU].
• Do not place the camera on the USB cradle yet.
4. On the “Set Up” tab, select “USB” and then
press [
X].
5. Use [ S] and [T] to select “Mass Storage” and
then press [SET].
6. Press the camera’s [ON/OFF] button to turn it
off and then place the camera on the USB
cradle.
• Do not place the camera onto the USB cradle while it is
turned on.
• If you plan to transfer images from the camera’s built-in
memory to your Macintosh, make sure there is no
memory card loaded in the camera.
[ ] (USB) Connector
A Plug
Mini-B Plug
USB Cable (Bundled)
USB Port