Casio YC-430 PJ - Manual (Page 106)

106
ADVANCED SETTINGS
4. After the EV value is
the way you want,
press [SET] to apply it.
The exposure compensation
value you set remains in
effect until you change it.
IMPORTANT!
• When shooting under very dark or very bright conditions,
you may not be able to obtain satisfactory results even
after performing exposure compensation.
NOTE
• You can also use the Panel (Operation Panel) (page 40) to
change the EV shift setting.
• Performing an EV shift operation while using multi-pattern
metering will cause the metering mode to switch
automatically to center weighted metering. The metering
mode will return to multi-pattern metering when you change
the exposure compensation value to 0.0 (page 111).
• You can use the key customization feature to configure the
[ W] and [X] buttons so they control the metering mode
setting (page 119). This comes in handy when adjusting
exposure compensation while viewing the on-screen
histogram (page 116).
EV Shift Value