Pentax me super - Manual (Page 2)

23903 Page 1 of 32
Disassembling and assembling procedures are almost the same as 23900 and/or
23901. Therefore, the details of disassembling and assembling procedures are
abbreviated.
Here is explained about special items for 23903.
Disassembly
1. Bottom cover assy. (A400)
CSS 1.7 x 3 x 2
CSS 1.7 x 2
Connector seat (A23)
2. Winding lever assy. (0-C69)
Cover screw (C139-01) left handed 23600K-C135-A
Winding lever nut (C8) left handed 23600K-C134-A-2
Winding lever assy, (0-C69)
Winding lever friction spring (C7-01)
3. Rewinding knob assy. (0-D6), ASA ring assy. (D-D11-01)
Rewinding knob assy. (0-D6)
Nut (D15)
*Washer (D21)
ASA ring assy. (0-D11-01)
*Washer (D2l)
To adjust the torque of click of ASA ring.
4. Top cover assy. (A300)
Top cover retainer screw A (A333) x 2
B (A334)
C (A342) x 2
D (A345)
*Top cover assy. (A300)
*Top cover assy. (A300)
Material of Top cover assy. (A300) is a plastic. But the
surface is made conductive by surface treatment. So that the
electrical conductive does not apply on the back of Top cover
assy. (A300).
5. Unsoldering
1)
P.C. board pattern (T100)
2) Relay P.C. board assy. (0-A129)
Before unsoldering, take out Insulation seal (A152)
to prevent melting by soldering iron.