Garmin Edge 800 - Manual (Page 20)

16 Edge 800 Owner’s Manual
ANT+ Sensors
1. Select MENU > > Bike
Settings > Bike Profiles.
2. Select a bike.
3. Select ANT+ Power > Calibrate.
4. Keep your power meter active by
pedaling until a message appears.
Setting Your Power Zones
You can set seven custom power zones
using Garmin Connect. If you know
your functional threshold power (FTP)
value, you can enter it and allow the
Edge to calculate your power zones
automatically.
1. Select MENU > > Bike
Settings > Bike Profiles.
2. Select a bike.
3. Select Power Zones.
4. Enter your FTP value.
5. Select Based On > and select an
option:
• Select Watts to view and edit
the zones in watts.
• Select % FTP to view and edit
the zones as a percentage of
your functional threshold power.
Non-Zero Averaging for Power
Data
The non-zero data-averaging setting
is available if you are training with
an optional power meter. The default
setting is to exclude zero values that
occur when you are not pedaling.
To turn the non-zero averaging on
or off, select MENU > > Bike
Settings > Data Recording > Data
Averaging > Power.