Garmin Forerunner 410 - Manual (Page 41)

Forerunner 410 Owner’s Manual 35
Using Accessories
Foot Pod
Your device is compatible with the
foot pod. You can use the foot pod
to send data for your device when
training indoors or when your GPS
signal is weak or you lose satellite
signals. The foot pod is on standby
and ready to send data (like the heart
rate monitor). You must pair the foot
pod with your device (see page 31) .
Calibrating the Foot Pod
Calibrating your foot pod is optional
and can improve accuracy. There are
three ways to adjust the calibration:
distance, GPS, and manual.
Distance Calibration
For best results, the foot pod should
be calibrated using the inside lane of
a regulation track. A regulation track
(2 laps = 800 m) is more accurate
than a treadmill.
1. Touch and hold menu > select
Settings > AnT+ > Accessories
> Foot Pod > Calibrate >
Distance .
2. Select a distance.
3. Press
start to begin recording.
4. Run or walk the distance.
5. Press
stop .
GPS Calibration
You must have GPS signals to
calibrate the Foot Pod using GPS.
1. Touch and hold
menu > select
Settings > AnT+ > Accessories
> Foot Pod > Calibrate > GPS .
2. Press start to begin recording.
3. Run or walk approximately
1000 m. The device informs
you that you have traveled far
enough.