Configure your device, Acquire satellite signals – Garmin Forerunner 410 User Manual
Page 11
Forerunner 410 Owner’s Manual
5
Getting Started
Configure Your Device
The first time you use your device,
follow the on-screen instructions
to learn how to use the bezel, set
your user profile, and configure the
device.
If you are using an ANT+ heart
rate monitor, select
Yes
during the
configuration to allow the heart
rate monitor to pair (connect) with
your device. See
for more
information.
The device uses your user profile to
calculate accurate workout data.
Acquire Satellite Signals
To set the correct time of day and
begin using the device, you must
acquire GPS satellite signals. It may
take a few minutes to acquire signals.
noTe: To turn off the GPS receiver
and use the device indoors, see
.
noTe: You cannot acquire satellites
in power save mode. To exit power
save mode, press
enter
or
quit
.
1. Go outdoors to an open area. For
the best reception, make sure the
antenna of the device is oriented
toward the sky.
Antenna
location
2. Touch and hold
training
to enter
training mode.