beautypg.com

NordicTrack NTL14010.0 User Manual

Page 9

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

6. With the help of a second person, hold the con­

sole assembly near the Left Upright (89).

Connect the Upright Wire (84) to the console
wire. See the inset drawing. The connectors
shouid slide together easily and snap into
place. If they do not, turn one connector and try
again. IF YOU DO NOT CONNECT THE CON­
NECTORS PROPERLY, THE CONSOLE MAY

BECOME DAMAGED WHEN YOU TURN ON
THE POWER. Then, remove the wire tie from
the Upright Wire.

7. Insert the wires into the Left Upright (89) as you

set the console assembly on the Left Upright
and the Right Upright (90). Be careful not to
pinch the Upright Wire (84).

Attach the console assembly with four 5/16" x

1 1/2" Bolts (5) and four 5/16" Star Washers
(10). Start all four Bolts, and then tighten

each of them.