Then, press the 0 percent incline button – NordicTrack NTL14010.0 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

10. Make sure there is a piece of cardboard below

the rear of the Frame (56).

IMPORTANT: See page 14 and plug in the
power cord. Next, see page 16 and turn on

the power.

Then, press the 0 percent Incline button.

When the Frame (56) stops moving, remove
the key from the console and unplug the

power cord.

11. IMPORTANT: Before you begin this step,

make sure that you have read and followed

all the instructions in step 10.

Raise the Frame (56) to the position shown.
Have a second person hold the Frame until

this step is completed.

Orient the Storage Latch (53) so that the large
barrel and the latch knob are oriented as shown.

Attach the upper end of the Storage Latch (53)
to the bracket on the Frame (56) with a 3/8" x

1 3/4" Bolt (6) and a 3/8" Nut (11).

Attach the lower end of the Storage Latch (53) to
the Base (97) with a 3/8" x 2" Bolt (3) and a 3/8"

Nut (11). Note: It may be necessary to move the
Frame (56) back and forth to align the Storage
Latch with the Base.