Lubrication, Specifications – MTD 315-860-000 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
LUBRICATION
SPECIFICATIONS:
Lubricate once a season or after every 25 h 3urs of
operation.
Oil—Use SAE 30 or equivalent.
Grease—Use automotive multi-purpose groase.
Lubricate chain once a season with enginii oil.
Engine—
Remove oil fill plug and add oil until it is
to full mark on dipstick.
Change Oil—
After first two
(2)
hours of operation
and every twenty-five
(25)
hours thereafter. Drain
oil from oil drain plug.
Use viscosity grade SAE 5W-30 or SAE 10W oil.
Capacity—
Approximately
1
V
2
pints.
Grease Chute Opening Once
A Season
Gear case is lubricated with 4
oz.
of
Shell
Alvania
grease
EPROO
(order
part
number
737-0168).
Differential
(Models 860 and 960)
is sealed at the factory and does
not
require
checking.
If
dis
assembled for any reason, lubri
cate with 3/4 oz. of Plastilube #0.
Order part number 737-0166.
14