Poulan CHDR500E - Manual (Page 12)

CUSTOMER RESPONSIBILITIES
MAINTENANCE
SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
A
r
v^A
/ ^ /
CV-ZV
/ k/ / kj
f &> 1
s/
A
A
/ kj
/ Co /
/
W<^/
/i/
§/
SERVICE DATES
Check Engine Oil Level ✓ ✓
Change Engine Oil
<2
Oil Pivot Points ✓
Inspect Spark Arrester / Muffler
✓
Inspect Air Screen ✓
Clean or Replace Air Cleaner Cartridge
Clean Engine Cylinder Fins ✓
Replace Spark Plug ✓
RH Gear Case Grease Fitting (1oz.) ✓
1 - Change more often when operating under a heavy ioad or in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
GENERAL RECOMMENDATIONS
The warranty on this tiller does not cover items that have
been subjected to operator abuse or negligence. T o receive
full value from the warranty, the operator must maintain tiller
as instructed in this manual.
Some adjustments will need to be made periodically to
properly maintain yourtiller.
All adjustments in the Service and Adjustments section of
this manual should be checked at least once each
season.
•
Once a year you should replace the spark plug, clean
or replace air filter, and check tines and belts for wear.
A new spark plug and clean air filter assure proper air-
fuel mixture and help your engine run better and last
longer.
BEFORE EACH USE
® Check engine oil level.
•
Check tine operation.
• Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See “LUBRICATION CHART”),
LUBRICATION CHART
THROTTLE
CONTROL
* SAE 30 OR 10W-30 MOTOR OIL
** REFER TO CUSTOMER RESPONSIBILITIES “ENGINE’
SECTION
*** EP #1 GREASE
12