Poulan CHDR500E User Manual

Owner's manual, T2£iridvio, Tiller

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Text mode
Original mode

у-М

h к 'ё

ill '

OWNER'S MANUAL

MODEL NO. CHDR500E
5 HP 17 Inch

T>0

T2£iriDvio

Tiller

• Assembly

• Operation

• Customer Responsibilities

• Service and Adjustments

• Storage

• Troubleshooting

• Repair Parts

For Parts and Service, contact our authorized distributor: call 1-800-849-1297

For Technical Assistance: call 1-800-829-5886

174222 2.8.00 TR

PRiNTEDiNU.S.A.

This manual is related to the following products:

174222

Table of contents

Document Outline

SAFE OPERATION PRACTICES FOR WALK-BEHIND POWERED ROTARYTILLERS
TRAINING
PREPARATION
OPERATION
MAINTENANCE AND STORAGE
-IMPORTANT-
PRODUCT SPECIFICATIONS
- CUSTOMER RESPONSIBILITIES
  - SERVICE & ADJUSTMENTS .14-17
TOOLS REQUIRED FOR ASSEMBLY
- OPERATOR’S POSITION (See Fig. 1)
- CONTENTS OF HARDWARE PACK
- UNPACKING CARTON (See Fig. 2)
- ATTACH CLUTCH CABLE (See Fig. 6)
- CONNECT SHIFT ROD (See Fig. 7)
- REMOVE TILLER FROM CRATE
- CHECK TIRE PRESSURE
- HANDLE HEIGHT
KNOW YOUR TILLER
- READ THIS OWNER’S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TILLER.
- MEETS ANSI SAFETY REQUIREMENTS
- STOPPING (See Fig. 9)
  - TINES AND DRIVE
  - ENGINE
- TINE OPERATION - WITH WHEEL DRIVE
- FORWARD - WHEELS ONLY/TINES STOPPED
- REVERSE - WHEELS ONLY/TINES STOPPED
- HARD TO SHIFT GEARS
- DEPTH STAKE (See Fig. 10)
  - FIG. 10
- TILLING (See Fig. 11)
- TURNING
- OUTER SIDE SHIELDS (See Fig. 11)
- TO TRANSPORT
  - AROUNDTHEYARD
  - AROUNDTOWN
BEFORE STARTING ENGINE
- CHECK ENGINE OIL LEVEL (See Fig. 12)
- ADD GASOLINE
- TO START ENGINE (See Fig. 13)
- TINE SHEAR PINS
- CULTIVATING
  - FIG. 15
- ADJUST WHEELS FOR CULTIVATING (See Figs. 16 and 17)
GENERAL RECOMMENDATIONS
- BEFORE EACH USE
- LUBRICATION
LUBRICATION CHART
ENGINE
- LUBRICATION
- AIR CLEANER (See Fig. 20)
- COOLING SYSTEM (See Fig. 21)
- MUFFLER
- SPARK PLUG
- TRANSMISSION
CLEANING
- CAUTION: Disconnect spark plug wire from spark plug and place wire where it cannot come into contact with plug.
TILLER
- TO ADJUST HANDLE HEIGHT (See Fig. 22)
- TO REMOVE WHEEL (See Fig. 23)
- TINE REPLACEMENT (See Figs. 24, 25 and 26)
  - FIG. 26
- TO REMOVE BELT GUARD (See Fig. 27)
- TO REPLACE GROUND DRIVE BELT (See Figs. 27 and 28)
- GROUND DRIVE BELT ADJUSTMENT (See Fig. 28)
ENGINE
- TO ADJUST THROTTLE CONTROL CABLE
- (See Fig. 29)
- TO ADJUST CARBURETOR
TILLER
ENGINE
- FUEL SYSTEM
- ENGINE OIL
- CYLINDER(S)
OTHER
TROUBLESHOOTING POINTS
- DESCRIPTION
- TILLER - - MODEL NUMBER CHDR500E
- TILLER - - MODEL NUMBER CHDR500E
  - TRANSMISSION
  - TINE ASSEMBLY
- LIMITED WARRANTY