Canon D10 - Manual (Page 77)

77
You can set the time delay (0 – 30 seconds) and the number of shots taken
(1 – 10 shots).
Select
$.
● After pressing the p button, press the
op buttons to select $, then
immediately press the
n button.
Select the settings.
● Press the op buttons to select [Delay] or
[Shots].
● Press the qr buttons to select a value,
then press the m button.
● Follow Step 3 in “ Ò Using the Self-Timer”
(p. 64) to shoot.
• Exposure and white balance settings are set with the first shot.
• When you set the time delay for more than 2 seconds, the self-timer lamp and
sound speed up 2 seconds before the shutter releases (when the flash will fire,
the lamp lights).
You can use a TV to display the camera screen content.
• Connect the camera to a TV as described in “Viewing Images on a TV”
(p. 109) .
•
Shooting procedures are the same as when using the camera’s monitor.
$ Customizing the Self-Timer
What if the number of shots is set to two or more shots?
• If the flash fires, the shooting interval may be longer.
• If you set a high number of shots, the shooting interval may be longer.
• If the memory card becomes full, shooting stops automatically.
Shooting Using a TV Monitor