Canon D10 - Manual (Page 72)

72
You can adjust the standard exposure set by the camera in 1/3-stop
increments in the range of –2 to +2.
Select the exposure
compensation.
● After pressing the o button, press the qr
buttons to adjust the exposure
compensation, then press the
m button.
The compensation range you set will
display on the screen.
You can shoot continuously at about 1.1 images/second.
Select the drive mode.
● After pressing the
m button, press the
op buttons to select .
Select
W.
● Press the
qr buttons to select W, then
press the m button.
Once set, W will appear on the screen.
Shoot.
As long as you hold the shutter button
down, the camera will shoot successive
images.
b Adjusting the Brightness
(Exposure Compensation)
W Continuous Shooting
• Cannot be used with the self-timer (pp. 64 , 65 , 76 , 77) .
• For continuous shooting, the focus and exposure are locked when the
shutter button is pressed halfway.
• As the number of images increases, the shooting intervals may take
longer.
• If the flash fires, shooting intervals may take longer.