Changing the front cover – Canon D10 User Manual

Page 143

143

You can change the front cover using the Front Cover Set FC-DC1 (Sold
Separately).

Remove the screws.

●

Using the tool included in the accessory
set, remove the two screws.

●

Take care not to lose the screws.
However, spare screws are included with
the accessory set.

Remove the front cover.

●

Using the removal tab, lift the cover in the
direction of the arrow to remove.

Put on a new cover.

●

Place the desired cover as shown in the
image, and press it until it clicks into
place.

●

Make sure there is no space between the
front cover and the camera.

Screw in the cover.

●

Replace the screws removed in Step 1.

Changing the Front Cover

Removal tab

Do not remove other screws besides the two on the front cover.