Troubleshooting, Power, Tv output – Canon D10 User Manual
Page 144: Shooting
144
If you think there is a problem with the camera, first check the following. If
the items below do not solve your problem, contact a Canon Customer
Support Help Desk as listed on the included customer support list.
Power
You pressed the ON/OFF button, but nothing happened.
•
Confirm that the battery is properly inserted
•
Confirm that the memory card/battery cover is securely closed
•
If the battery terminals are dirty, battery performance will decrease. Clean the
terminals with a cotton swab and re-insert the battery several times.
Battery is consumed quickly.
•
Battery performance decreases at low temperatures. Warm the battery by such
methods as placing them in your pocket with the terminal cover on.
TV output
Image is distorted or not showing on TV
Shooting
Cannot shoot.
•
When in playback
, press the shutter button halfway
Camera screen is black at start-up.
•
Images that have been edited on a computer, have had their name changed, or
that have been taken with another camera may not display correctly when set as
a start-up screen.
Screen does not display properly in dark places
.
Screen does not display properly while shooting.
Please note, the following will not be recorded in still images, but will be recorded
in movies.
•
When the camera is subjected to powerful light sources, the display may
darken.
•
Under fluorescent lighting, the screen may flicker.
•
When shooting bright light sources, a bar of light (purplish red) may appear on
the screen.
The
h icon blinks when you try to shoot
appears when the shutter button was pressed halfway
•
Set the [IS mode] to [Continuous]
•
Set the flash to
h
•
Increase the ISO speed
.
•
Attach the camera to a tripod.
Troubleshooting